EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR CHARGE CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Cost Controller is usually a extremely productive solar controller designed for off-grid photo voltaic methods. Based upon multiphase synchronous rectification engineering, it makes certain optimized Electricity conversion and system stability for a wide range of photovoltaic (PV) applications.
Crucial Functions on the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence makes use of EPEVER Photo voltaic Cost Controller know-how for exceptional solar Strength harvesting. Vital features consist of:
Multiphase Synchronous Rectification (MSR) for improved Power conversion.
Highly developed MPPT Algorithm with >ninety nine% performance.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Exhibit with authentic-time facts checking.
Many Load Management Modes which include guide and timer.
Thorough Electronic Protections towards overcharging, more than-discharging, small circuits, and reverse polarity.
Stage-by-Stage Manual to Setting Up the EPEVER Tracer AN Series Controller
one. Unboxing and Making ready the Controller
Assure all parts are incorporated: Tracer AN unit, temperature sensor, conversation cables, and user handbook.
Confirm the design amount and voltage scores match your solar panel and battery specs.
2. Mounting the Demand Controller
Select a well-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Retain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right basic safety protocols and ensure the system is run off just before connecting components.
Stage 1: Connect the battery terminals to the demand controller (constructive to optimistic, negative to destructive).
Action 2: Join the photo voltaic panel array for the PV input terminals.
Stage three: Link the visit here load terminals if utilizing a direct load relationship.
Phase 4: Double-Look at all connections for polarity and tightness.
4. Configuring the Controller Settings
Electricity about the controller by connecting the battery very first.
Utilize the Liquid crystal display Show to navigate the configurations menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports genuine-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 communication port using software package including Solar Station Personal computer.
Remote checking is feasible with the EPEVER WiFi module.
six. Troubleshooting Common Difficulties
Problem one: No Electrical power Output
Look at battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Challenge two: Over-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if vital.
Concern 3: No Battery Charging
Inspect PV wiring for continuity.
Validate MPPT configurations while in the menu.
Great things about the Tracer AN Series with MSR Technological innovation
The multiphase synchronous rectification technology makes certain:
Higher Effectiveness: Reduced Strength losses throughout conversion.
Improved Dependability: Stable efficiency beneath variable hundreds.
For a longer time Battery Everyday living: Steady and precise charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technology is surely an Extraordinary option for optimizing solar energy era and extending battery existence. By pursuing the above mentioned set up tutorial, customers can assure maximum effectiveness and process longevity.